ISILON basic commands

Here in this post, we are discussing a few basic isilon commands. Some of which comes to our help in our daily administration tasks for managing and monitoring the isilon array. You may refer the Celerra/VNX health check steps also we discussed in one of our previous posts.

Here are some of the isilon commands.

isi status : Displays the status of the cluster,nodes and events etc… You can use various options including -r (for displaying raw size), -D (for detailed info) -n (info for specific node -n <node id>)

isi_for_array : For running various commands against specific nodes. -n for a specific node and

isi events : There are many options with the ‘events’ command including isi events list (to list all the events) isi events cancel (to cancel the events) isi events quiet (to quiet the events). You can setup event notifications also using the isi events command.

isi devices : To view and change the cluster devices status. There are plenty of options with the devices command.

isi devices –device <Device>  : where Device can be a drive or an entire node. –action option is used to perform any specific option on the devices (–action <action>) including smartfail, stopfail, status, add, format etc…

isi firmware status : is used to list the isilon firmware type and versions.

isi nfs exports : NFS exports command is used for various isilon NFS operations including export creation, listing/viewing modifying etc… Below are a list of sub-commands.

1. isi nfs exports create –zone <zone name> –root-clients=host1, host2 –read-write-clients=host2, host3 –path=<path>

2. isi nfs exports view <export ID> –zone=<zone name>

3. isi nfs exports modify <export ID> –zone=<zone name> –add-read-write-clients host4

isi smb share : This command is used to create, list/view, modify etc… operations on SMB shares. Sample sub-commands –

1. isi smb shares create <share name> –path=/ifs/data/SMBpath –create-path –browsable=true –zone <zone name> –description=”Test share”

2. isi smb shares delete <share name> –zone=<zone name>

isi quota quotas : this command is used for various quota operations including creation/deletion/modification etc…

Hope this post helped you. Please feel free to comment if you have any questions. We will discuss more detailed commands in a later post.


Leave a Reply

Your email address will not be published.